|
 Phidget Linear Touch #1015
The Phidget Linear Touch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact.
|
 Phidgets Circular Touch #1016
The PhidgetCircularTouch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact.
|
 Phidget GPS (1040)
The Phidget GPS provides the longitude and latitude of the boards position in signed decimal degree format. The position accuracy (best case) is 2.5m CEP (Circular Error of Probability).
|
 Phidget Temperature Sensor IR (1045)
The 1045 is an intelligent non-contact temperature sensor with a 10 degree field of view and a USB interface for easy connection to your computer. It measures the temperature of objects placed within its cone of detection.
|
 Phidgets Encoder High Speed 4-Input (1047)
The PhidgetEncoder Highspeed 4-Input can be used with a wide assortment of mechanical and optical encoders. The encoder should be of quadrature output type, indicating that there will be two quadrature output channels (usually labeled A and B) and a third output channel (only on some encoders) to signal when the index pin (a reference point for zero position or a complete revolution) has been reached.
Part Number: 1047
|
 Phidgets Temperature Sensor 4-Input #1048
Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors.
J, K, E and T thermocouples are directly supported in the library and return the measured temperature in Celsius.
|
 Phidget Temperature Sensor - 1 Thermocouple input #1051
Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors.
J, K, E and T thermocouples are directly supported in the library and return the measured temperature in Celsius.
|
 Phidget Encoder #1052
The PhidgetEncoder is intended to be used as a human interface, not as a device to measure shaft speed of motors or pulleys. If you are looking for an encoder to measure shaft speed, have a look at the 1057 PhidgetEncoder HighSpeed.
|
 Phidget Spatial 3/3/3 (1056)
The 1056 - PhidgetSpatial 3/3/3 measures static and dynamic acceleration in 3 axes, up to 5g.; it also measures magnetic field in 3-axes up to ±4 Gauss and finally measures angular rotation in 3 axes, up to ±400° per second.
Part Number: 1056
|
 Phidget Encoder High Speed #1057
The PhidgetEncoder HighSpeed connects to any typical two-bit optical encoder and can return up to 500,000 counts per second. Specifically it reads a standard incremental non-differential TTL encoder.
|
 Phidget Ph Sensor #1058
The PhidgetPhSensor connects to any typical Ph or ORP Electrode.
With the PhidgetPHSensor you can:
- Measure pH
- Record Oxidation - Reduction Potential (ORP)
- Monitor ion and gas concentrations
|
 Phidget IR Reflective Sensor 5mm #1102
This sensor uses infrared technology to detect an object at 5mm by determining the difference between low reflective conditions (i.e. black) and high reflective conditions (i.e. white).
|
 Phidgets IR Reflective Sensor 10cm #1103
This sensor can detect the presence of objects at a distance of 0 to 10cm regardless of the object reflective properties. The 1103 works just as well in both dim and well lit environments.
|
 Phidget Vibration Sensor #1104
This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages.
|
 Phidgets Force Sensor #1106
The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000.
It is intended as a user input device (i.e. recognizing that someone is pushing a button).
|
 Phidget Magnetic Sensor #1108
The 1108 is a Hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field.
|
 Phidgets Rotation Sensor #1109
The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. The maximum resistance of the potentiometer is 10K ohm.
|
 Phidgets Infrared Motion Sensor #1111
The 1111 detects changes in infrared radiation that occur when there is movement by a person (or object), which is different in temperature from the surroundings. As this sensor detects temperature differences, it is well suited to detecting the motion of people by their body temperature.
|
 Phidgets 60mm Slider #1112
The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over the 60mm travel of the slider. The maximum resistance is 10K ohms.
|
 Phidgets Mini Joy Stick Sensor #1113
This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximately 500. When you move the Joystick from its center position the value will increase or decrease depending on the direction.
|
 Phidgets Pressure Sensor #1115
The 1115 measures absolute gas pressure from 20 to 250 kPa (2.9 to 36.3 psi) with a maximum error of ±1.5%.
It is suitable for measuring vacuum, or atmospheric pressure; it can also be used as a crude barometer.
|
 Phidgets FlexiForce Adapter #1120
The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad.
|
 Phidgets Voltage Divider #1121
The 1121 provides an interface to non-Phidgets resistance sensors such as: Force-Sensing Resistors (FSR), light sensors, thermistors (heat sensors), and bend sensors.
|
 Phidgets 30 Amp Current Sensor AC/DC #1122
The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC components of complex current waveforms separately.
|
 Phidgets Humidity/Temperature Sensor #1125
Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH.
Measures Ambient Temperature in the range of -50°C to +150° C with a typical error of ±0.75°C in the 0°C to 100°C range.
|
 Phidgets Differential Gas Pressure Sensor #1126
The Differential Pressure Sensor is a dual ported gas pressure sensor that measures the pressure difference between the two ports. It can measure both positive and negative pressure from –25kPa to +25 kPa.
|
 Phidgets Precision Light Sensor #1127
The Precision Light Sensor measures human perceptible light level in lux; its measurement range is from 1 lux (Moonlight) to 1000 lux (TV studio lighting)
|
 Phidgets Sonar Sensor #1128
The Sonar Sensor is a compact high performance ultrasonic rangefinder that can detect objects at a distance of 6 to 254 inches (6.45 m) with a 1 inch resolution. The sensor automatically calibrates itself when powered up.
|
 Phidgets Touch Sensor 1/2 inch #1129
The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2 inch.
|
 Phidgets Sound Sensor #1133
The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB.
|
 Phidgets Switchable Voltage Divider #1134
The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the voltage divider. The resistance values (in Ohms) are 249, 820, 2.61K, 8.45K, 27.4K, 91K, 300K and 1M. It is possible to have multiple switches flipped, putting the corresponding resistors in parallel.
|
 Phidgets Precision Voltage Sensor #1135
The Voltage Sensor measures the differential voltage between the input terminals and outputs the difference proportionally. The maximum differential voltage that can be measured accurately is ±30V.
|
 Phidgets K-Type Thermocouple #3015
Ready-Made Insulated Thermocouple with Miniature Male Connector and Heavy Duty Flex Strain Relief.
Manufactured by Omega
Part #: 5SRTC-GG-K-24-36
|
 Phidgets i-Snail-VC-25 Current Sensor 25Amp (3501)
The i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).
Part Number: 3501
|
|
Phidgets Spatial Accelerometer 0/0/3 (1049)
Phidgets IR Distance Adapter #1101
x
Phidget Multi-turn Rotation Sensor #1116
Phidgets Precision Voltage Sensor #1123
Phidgets Precision Temperature Sensor #1124