 Phidgets Dual Relay Board #3051
The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.
Product Features:
- The 3051 contains 2 relays for switching AC or DC power.
- The relays are Single Pole Double Throw (SPDT)
- The relays can switch up to 240 V AC at 10 Amps and 100 V DC at 5 Amps.
Product Specifications:
- The 3051 contains 2 relays for switching AC or DC power
- The relays are Single Pole Double Throw (SPDT)
- The relays can switch up to 240 V AC at 10 Amps and 100 V DC at 5 Amps
- The terminal blocks accept 12-24 AWG wires
Comes packaged with:
This sensor connects to an Analog Input on the:
- 1018 - PhidgetInterfaceKit 8/8/8
- 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
- 1202 – PhidgetTextLCD
- 1203 – PhidgetTextLCD
Related Products:
Note: All relay contacts will slowly oxidize over time, depending on their construction. When the relay is switched, a certain amount of electricity is required to break through the oxide layer. The relays on the 0/0/4 have a minimum switching current of 100mA @ 5VDC, and therefore are not suitable for switching signals.
If you are looking for a product to do signal switching see 1017 PhidgetInterfaceKit 0/0/8.
We also have a 4-Relay board that can plug directly into your PC. See the 1014 – PhidgetInterfaceKit 0/0/4.
Additional Links:
Product Manual
Previous Product Manual - board revision 0
Phidgets Dual Relay Board #3051
|
