Phidget Interface Kit 0/16/16 Digital Input/Output #1012

The new version of the 1012 PhidgetInterfaceKit 0/16/16 has built-in filtering on the digital input, to eliminate false triggering from electrical noise. The digital input is first RC filtered by a 15K/100nF node, which rejects noise of higher frequency than 1Khz. This filter generally eliminates the need to shield the digital input from inductive and capacitive coupling likely to occur in wiring harnesses.

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

Comes packaged with a 180cm USB Cable, and a mounting hardware kit.

The Phidget Interface Kit 0/16/16 provides:

• 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC
• 16 Digital Outputs controlling up to 30VDC
• LED indicators on all I/O channels