Phidgets for USB Sensing and Control
Phidgets are a set of "plug and play" building blocks for
low cost USB sensing and control from your PC.
All the USB complexity is taken care of by our robust API. Applications
can be developed quickly by programmers using their favorite language:
C/C++, C#, Cocoa, Delphi, Flash AS3, Flex AS3, Java, LabVIEW, MATLAB,
Max/MSP, MRS, Python, REALBasic, Visual Basic.NET, Visual Basic 6.0,
Visual Basic for Applications, Visual Basic Script, and Visual C/C++/Borland.NET. |
|
 Phidget Analog 4-Output (1002)
The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will be reported when this current is exceeded, and the voltage the customer is getting is no longer accurate. The voltage is produced with 12 bit resolution (4.8mV).
|
 Phidget Interface Kit 2/2/2 (1011)
Designed for customers who only need a couple of Analog Inputs, Digital Inputs or Digital Outputs, the dongle size PhidgetInterfaceKit 2/2/2 is ideal for projects where space is critical.
Part Number: 1011
|
 Phidget Interface Kit 0/16/16 Digital Input/Output #1012
The new version of the 1012 PhidgetInterfaceKit 0/16/16 has built-in filtering on the digital input, to eliminate false triggering from electrical noise. The digital input is first RC filtered by a 15K/100nF node, which rejects noise of higher frequency than 1Khz. This filter generally eliminates the need to shield the digital input from inductive and capacitive coupling likely to occur in wiring harnesses.
|
 Phidget Linear Touch #1015
The Phidget Linear Touch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact.
|
 Phidgets Circular Touch #1016
The PhidgetCircularTouch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit board opposite the connector and components is the side intended for contact.
|
 Phidgets Interface Kit 0/0/8 #1017
The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 65 Watts. It is typically used for switching small signals, as opposed to high current applications. For high current applications see the 1014 - PhidgetInterfaceKit 0/0/4.
|
 Phidget Interface Kit 8/8/8 #1018
The Phidget Interface Kit 8/8/8 provides:
- 8 Analog Inputs
- 8 Digital Inputs with hardware noise filtering
- 8 Digital Outputs
- Connects directly to a computers USB port
|
 Phidget RFID #1023
The PhidgetRFID reads RFID tags that are brought in close proximity to the reader and returns the tag identification number.
|
 Phidgets LED-64 Advanced #1031
The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can be turned on and off, and its brightness controlled. Most standard LEDs with colors such as red, amber, orange, yellow, and green have forward voltages below 2.75 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board connector. The forward voltage will default to 2.75V, and the maximum current defaults to 20mA.
|
 Phidget Temperature Sensor - 1 Thermocouple input #1051
Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors.
J, K, E and T thermocouples are directly supported in the library and return the measured temperature in Celsius.
|
 Phidget Encoder #1052
The PhidgetEncoder is intended to be used as a human interface, not as a device to measure shaft speed of motors or pulleys. If you are looking for an encoder to measure shaft speed, have a look at the 1057 PhidgetEncoder HighSpeed.
|
 Phidget Encoder High Speed #1057
The PhidgetEncoder HighSpeed connects to any typical two-bit optical encoder and can return up to 500,000 counts per second. Specifically it reads a standard incremental non-differential TTL encoder.
|
 Phidget Ph Sensor #1058
The PhidgetPhSensor connects to any typical Ph or ORP Electrode.
With the PhidgetPHSensor you can:
- Measure pH
- Record Oxidation - Reduction Potential (ORP)
- Monitor ion and gas concentrations
|
 Phidgets Advanced Servo 8-Motor #1061
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC external power supply; its switching power supply allows the 1061 to efficiently operate from 6 to 15 VDC and can be used with a wide range of batteries.
|
 Phidget Stepper Unipolar 4-Motor #1062
The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be used in applications that require precise positioning and continuous rotation, at low cost.
|
 Phidgets Stepper Bipolar 1-Motor (1063)
OUT OF STOCK: Expected back in stock on January 15th
The 1063 – PhidgetStepper Bipolar 1-Motor allows you to control the position, velocity, and acceleration of one bipolar stepper motor.
|
 Phidget Motor Control HC #1064
The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors.
|
 Phidget SBC2 Single Board Computer with an integrated PhidgetInterfaceKit 8/8/8 (1072)
The PhidgetSBC2 is a Single Board Computer with an integrated PhidgetInterfaceKit 8/8/8. At its most basic, it can be thought of as a Phidget that you connect using a network cable instead of USB. The PhidgetSBC2 also provides six full-speed ports that allow you to use normal USB Phidgets over its network connection. This can extend the effective range of a Phidget from USBs maximum of 15 feet, to anywhere that your network reaches.
|
 Phidget IR Reflective Sensor 5mm #1102
This sensor uses infrared technology to detect an object at 5mm by determining the difference between low reflective conditions (i.e. black) and high reflective conditions (i.e. white).
|
 Phidgets IR Reflective Sensor 10cm #1103
This sensor can detect the presence of objects at a distance of 0 to 10cm regardless of the object reflective properties. The 1103 works just as well in both dim and well lit environments.
|
 Phidgets Piezoelectric Vibration Sensor #1104
This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages.
|
 Phidgets Force Sensor #1106
The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000.
It is intended as a user input device (i.e. recognizing that someone is pushing a button).
|
 Phidget Magnetic Sensor #1108
The 1108 is a Hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field.
|
 Phidgets Rotation Sensor #1109
The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. The maximum resistance of the potentiometer is 10K ohm.
|
 Phidgets Infrared Motion Sensor #1111
The 1111 detects changes in infrared radiation that occur when there is movement by a person (or object), which is different in temperature from the surroundings. As this sensor detects temperature differences, it is well suited to detecting the motion of people by their body temperature.
|
 Phidgets 60mm Slider #1112
The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over the 60mm travel of the slider. The maximum resistance is 10K ohms.
|
 Phidgets Mini Joy Stick Sensor #1113
This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximately 500. When you move the Joystick from its center position the value will increase or decrease depending on the direction.
|
 Phidgets Pressure Sensor #1115
The 1115 measures absolute gas pressure from 20 to 250 kPa (2.9 to 36.3 psi) with a maximum error of ±1.5%.
It is suitable for measuring vacuum, or atmospheric pressure; it can also be used as a crude barometer.
|
 Phidgets FlexiForce Adapter #1120
The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter. We even give you a round plastic disc for the sensing pad.
|
 Phidgets Voltage Divider #1121
The 1121 provides an interface to non-Phidgets resistance sensors such as: Force-Sensing Resistors (FSR), light sensors, thermistors (heat sensors), and bend sensors.
|
 Phidgets 30 Amp Current Sensor AC/DC #1122
The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC components of complex current waveforms separately.
|
 Phidgets Humidity/Temperature Sensor #1125
Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH.
Measures Ambient Temperature in the range of -50°C to +150° C with a typical error of ±0.75°C in the 0°C to 100°C range.
|
 Phidgets Differential Gas Pressure Sensor #1126
The Differential Pressure Sensor is a dual ported gas pressure sensor that measures the pressure difference between the two ports. It can measure both positive and negative pressure from –25kPa to +25 kPa.
|
 Phidgets Precision Light Sensor #1127
The Precision Light Sensor measures human perceptible light level in lux; its measurement range is from 1 lux (Moonlight) to 1000 lux (TV studio lighting)
|
 Phidgets Sonar Sensor #1128
The Sonar Sensor is a compact high performance ultrasonic rangefinder that can detect objects at a distance of 6 to 254 inches (6.45 m) with a 1 inch resolution. The sensor automatically calibrates itself when powered up.
|
 Phidgets Touch Sensor 1/2 inch #1129
The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2 inch.
|
 Phidgets Sound Sensor #1133
The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB.
|
 Phidgets Switchable Voltage Divider #1134
The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the voltage divider. The resistance values (in Ohms) are 249, 820, 2.61K, 8.45K, 27.4K, 91K, 300K and 1M. It is possible to have multiple switches flipped, putting the corresponding resistors in parallel.
|
 Phidgets Precision Voltage Sensor #1135
The Voltage Sensor measures the differential voltage between the input terminals and outputs the difference proportionally. The maximum differential voltage that can be measured accurately is ±30V.
|
 Phidget Text LCD Adapter (1204)
The PhidgetTextLCD Adapter lets you connect one or two HD44780 LCD modules. The adapter can handle up to 4 lines of 40 characters, depending on the LCD module you are using. You can separately adjust the backlight and the character contrast of each LCD module.
Part Number: Phidget 1204
|
 Phidget Starter Kit #2 #2004
Product Features:
- This is a kit you won't grow out of
- We have put together the most popular kits into this bundle
|
 Phidget LV Motor Kit #2007
- Control two DC motors, forward, reverse and speed control
- This kit comes packaged with everything you need to get started
|
 Phidgets K-Type Thermocouple #3015
Ready-Made Insulated Thermocouple with Miniature Male Connector and Heavy Duty Flex Strain Relief.
Manufactured by Omega
Part #: 5SRTC-GG-K-24-36
|
 Phidgets Dual Relay Board #3051
The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.
|
 Phidgets USB 1.1 Isolator #3060
The USB Isolator is designed to protect your PC from harmful voltage that can flow from devices attached to your PC through the USB cable. The isolator is inserted between the Phidgets board and your PC.
|
 Phidgets i-Snail-VC-25 Current Sensor 25Amp (3501)
The i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).
Part Number: 3501
|
|
|
Phidget Interface Kit 0/0/4 Relay Output #1014
Phidgets Motor Control 1-Motor (1065)
Phidgets IR Distance Adapter #1101
x
Phidget Multi-turn Rotation Sensor #1116
Phidgets Precision Voltage Sensor #1123
Phidgets Precision Temperature Sensor #1124
Phidget Text LCD 20X2 : White : Integrated Interface Kit 8/8/8
Phidget Servo Kit 1-Motor #2000
Phidget Radio ID RFID Kit #2002
Phidget Starter Kit #1 #2003
Phidget Interface Kit Package #1 #2005
Phidget Interface Kit Package #2 #2006
Phidget Advanced Servo Kit 4-Motor #2010
Phidgets RFID Tag - 30mm Disc #3007
Phidgets RFID Tag - Credit Card Sized #3008
Phidgets RFID Tag - Key Fob #3009