 Opticis Two-Fiber Detachable DVI Extension Module (M1-201DA-TR)
The M1-201DA-TR optical DVI module transmits optical data, Red, Green, Blue and clock and can be extended up to 1,500 meters (4,920ft) over two LC multi or single-mode fiber at WUXGA (1920x1200) at 60Hz vertical refresh rate.
Part Number: M1-201DA-TR
The EDID parameters in a display can be read and restored by plugging the Transmitter module into the display. This self-EDID programming feature virtual DDC (vDDC) feature makes the field installation of M1-201DA-TR easy and flexible for nearly all contemporary display systems.
An external power adapter is required for the receiver module, while most video cards can provide +5V DC power to the transmitter module. The transmitter and receiver modules are clearly labeled to prevent reverse installation of the modules.
Features:
- Extends all DVI VESA resolutions up to WUXGA (1,920 X 1,200) 60Hz DVI data up to 1,500 meters (4,920 feet) with glass optical fibers.
- Applicable to both single-mode and multi-mode fibers.
- Up to 1,500m with two LC single-mode fibers.
- Up to 500m with two LC multi-mode fibers.
- Offers self-EDID programming feature, detecting from a display and restoring to an EEPROM in the transmitter just by plugging to the display without any physical DDC connection.
- The modules are compact enough to directly plug into graphic cards and displays.
- Includes two (2) +5V DC power adapters for the transmitter and receiver, one for each end.
- Certifies FCC and CE standards for EMI/RFI emission.
- Data security protection is optimal with glass optical fiber.
- Uncompressed, lossless video over the link.
- Complies with Class 1 Laser eye safety in compliance with FDA/CDRH and IEC 60825-1
Applications:
- Digital FPDs, PDPs and projectors for medical appliances, military, aerospace, traffic control platforms, factory automation, and bank systems.
- Digital FPDs and projectors in conference rooms and auditoriums.
- Kiosk with digital FPDs showing full motion graphic displays from remote systems.
- PDP displays for information in public sites.
- LED signboards in streets and in stadiums.
Self-EDID Function:
The EDID in a display can be read and restored by just plugging it to the display. This self-EDID programming feature makes the installation of M1-201DA more easy and flexile at any variable resolution display systems.
Auto Power Selection and Power Protection in Transmitter Module:
The laser diodes are lit only when +5V voltage should be supplied into the 14-pin in DVI connectors. The transmitter (Tx) module of M1-201DA-TR is designed a power protection circuit from conflict of power supply between the external DC power adapter and your graphic card through the DVI pin. It offers an option of whether to use an AC/DC power adapter depending on power supply capability of the graphic card through the +5V pin, you are using.
Signal Detect Mode in Receiver Module
It offers squelch function blocking output signals when optical input power is lower than as specified in a certain case, for instance, loosing optical connectors.
Additional Links:
Brochure (.pdf)
Data Sheet (.pdf)
Users Manual (.pdf)
Duplex Fiber Cables
Opticis Two-Fiber Detachable DVI Extension Module (M1-201DA-TR)
|
